The HDPE Socket Fusion Male Thread Manifold for Water is a PE100 socket fusion manifold with male threaded outlets, designed for multi-branch flow distribution in potable water and industrial water systems.
| Specification |
Value |
| Material | HDPE PE100 |
|---|
| Standard | ISO 4427 |
| Type | Male Thread Manifold |
| Pressure Rating | PN10 / PN16 |
| Size Range | DN20 - DN630 |
Key Features of HDPE Socket Fusion Male Thread Manifold for Water
- Dual-connection system combining socket fusion and threaded interfaces.
- Optimized internal flow channels minimize pressure drop.
- Certified for direct potable water contact.
- Chemical corrosion resistance with UV stabilization protects.
- Self-aligning fusion interface design simplifies installation.
Manufacturing Process of HDPE Socket Fusion Male Thread Manifold for Water
Each is produced by precision injection molding.
Critical Process Parameters of HDPE Socket Fusion Male Thread Manifold for Water
- Melt temperature control: 200±5°C
- Holding pressure: 750–1000 bar
- Mold cooling gradient management
- Wall thickness uniformity tolerance ≤5%
- Fusion face surface roughness Ra≤12.5 μm
Raw Material Characteristics of HDPE Socket Fusion Male Thread Manifold for Water
- Density: 0.950–0.965 g/cm³
- Elastic modulus: 800–1100 MPa
- Melt Flow Index (190°C/5kg): 0.10–0.25 g/10min
- Slow crack growth resistance: ≥8760h
- Stress crack resistance: ≥500h (ASTM D1693)
Typical Applications of HDPE Socket Fusion Male Thread Manifold for Water
- is used in branch distribution networks in municipal water systems.
- serves flow splitting in industrial cooling circuits.
- is installed at distribution nodes for agricultural irrigation mains.
- is used in floor-level distributors in building water systems.
Application Scenarios of HDPE Socket Fusion Male Thread Manifold for Water
- Multi-branch flow distribution and District Metering Area nodes — is the standard manifold for these applications.
