HDPE Socket Fusion End Cap for Water

Key Features of HDPE Socket Fusion End Cap for Water

• Socket fusion design for leak-free sealing.
• HDPE material resists chemical corrosion and UV radiation.
• Smooth inner wall minimizes head loss.
• The fitting complies with ISO 4427 potable water safety standards.

Manufacturing Process of HDPE Socket Fusion End Cap for Water

Each is produced by injection molding with controlled process parameters.

Critical Process Parameters of HDPE Socket Fusion End Cap for Water

• Melt temperature control: 190–220°C
• Optimized mold cooling rate
• Holding pressure accuracy ±0.5 MPa
• Molecular orientation control for structural homogeneity

Raw Material Characteristics of HDPE Socket Fusion End Cap for Water

• Density: 0.945–0.955 g/cm³
• Melt Flow Rate: 0.2–0.4 g/10min
• Tensile strength ≥22 MPa
• Elastic modulus ≥800 MPa

Typical Applications of HDPE Socket Fusion End Cap for Water

• is used for terminal sealing in municipal water supply networks.
• serves pipe end closure in industrial cooling water systems.
• The fitting provides irrigation pipeline terminal protection.
• is installed in building water supply and drainage systems.

Application Scenarios of HDPE Socket Fusion End Cap for Water

• Isolation of maintenance sections and pressure test points — is the standard cap for these closures.