HDPE Socket Fusion 90° Female Elbow for Fuel Gas

Key Features of HDPE Socket Fusion 90° Female Elbow for Fuel Gas

• The 90° elbow design optimizes fluid direction change.
• Female thread structure enhances connection sealing.
• Socket fusion ensures leak-free joints.
• UV-resistant and chemical corrosion protection coating covers the fitting.

Manufacturing Process of HDPE Socket Fusion 90° Female Elbow for Fuel Gas

Each is produced by precision injection molding.

Critical Process Parameters of HDPE Socket Fusion 90° Female Elbow for Fuel Gas

• Melt temperature control: 200–220°C
• Mold cooling rate optimization
• Holding pressure accuracy ±0.5 bar
• Dimensional tolerance control per ISO 11922

Raw Material Characteristics of HDPE Socket Fusion 90° Female Elbow for Fuel Gas

• Density: 0.950 g/cm³ (ISO 1183)
• Slow Crack Growth Resistance >5000h (ISO 13479)
• Minimum Required Strength: 10 MPa (ISO 12162)
• Melt Flow Rate: 0.2 g/10min

Typical Applications of HDPE Socket Fusion 90° Female Elbow for Fuel Gas

• is used for directional changes in medium/low pressure gas mains.
• serves retrofitting sections of underground gas networks.
• The fitting provides safety isolation units before gas meters.
• is installed in inlet pipelines for industrial gas equipment.

Application Scenarios of HDPE Socket Fusion 90° Female Elbow for Fuel Gas

• 90° directional changes with threaded connections in gas networks — is the standard elbow for these transitions.