HDPE Electrofusion Double Sealing Equal Tee for Water

Key Features of HDPE Electrofusion Double Sealing Equal Tee for Water

• Dual O-ring sealing for zero leakage.
• 100% automated electrofusion weld joints.
• Equal diameter design for uniform flow distribution.
• Embedded copper wires compliant with ISO/EN standards.
• Visual fusion observation window.

Manufacturing Process of HDPE Electrofusion Double Sealing Equal Tee for Water

Each is produced by injection molding with integrated resistance wire placement and simultaneous dual-seal groove machining.

Critical Process Parameters of HDPE Electrofusion Double Sealing Equal Tee for Water

• Melt temperature control: 200±5°C
• Mold cooling gradient: <2°C/sec
• Copper wire positioning accuracy: ±0.1mm
• Seal groove surface roughness: Ra≤3.2μm

Raw Material Characteristics of HDPE Electrofusion Double Sealing Equal Tee for Water

• Density: 950 kg/m³ (ISO 1183)
• Melt Flow Index: 0.15 g/10min (190°C/5kg)
• Environmental Stress Crack Resistance: >1000h (ISO 13479)
• Thermal stability: >20 years
• Oxidation Induction Time: >30min

Typical Applications of HDPE Electrofusion Double Sealing Equal Tee for Water

• is used for municipal water distribution branch connections.
• serves industrial cooling water circulation systems.
• is installed in wastewater treatment plant process lines.
• is used in agricultural irrigation network junctions.

Application Scenarios of HDPE Electrofusion Double Sealing Equal Tee for Water

• Equal-flow branching and distribution connections — is the standard tee for these applications.