HDPE Butt Fusion Reducer Cross for Water

Key Features of HDPE Butt Fusion Reducer Cross for Water

• 90° perpendicular branch design optimizes fluid distribution.
• Reducer configuration accommodates varying pipe diameters.
• Full fusion weld interface guarantees zero-leak sealing.
• Compliant with ISO 4427 potable water standards.

Manufacturing Process of HDPE Butt Fusion Reducer Cross for Water

Each is produced by injection molding.

Critical Process Parameters of HDPE Butt Fusion Reducer Cross for Water

• Melt temperature control: 200–220°C
• Mold cooling rate gradient management
• Holding pressure: 75–100 MPa
• Weld face concentricity tolerance ≤0.1mm

Raw Material Characteristics of HDPE Butt Fusion Reducer Cross for Water

• Density: 0.95 g/cm³ (ISO 1183)
• Melt Flow Index: 0.3 g/10min (190°C/5kg)
• Slow Crack Growth Resistance >5000h (ISO 13479)
• Hydrostatic Strength ≥10.0 MPa (20°C, 50 years)

Typical Applications of HDPE Butt Fusion Reducer Cross for Water

• is used in municipal potable water distribution networks.
• serves industrial cooling water circulation systems.
• is installed at agricultural irrigation mainline distribution nodes.
• is used in building internal water supply systems.

Application Scenarios of HDPE Butt Fusion Reducer Cross for Water

• Reducer cross connections in water networks — is the standard fitting for these applications.