HDPE Butt Fusion Equal Y Tee for Water

Key Features of HDPE Butt Fusion Equal Y Tee for Water

• 45° lateral branch reduces turbulence.
• Full bore design maintains flow efficiency.
• Electrofusion butt joints ensure permanent seals.
• 100% non-metallic construction eliminates corrosion.

Manufacturing Process of HDPE Butt Fusion Equal Y Tee for Water

Each is produced by CNC injection molding for DN≤315mm or modular fabrication welding for DN>315mm.

Critical Process Parameters of HDPE Butt Fusion Equal Y Tee for Water

• Melt temperature control: 200±5°C
• Cooling rate gradient management
• Fusion surface roughness Ra≤12.5μm
• Holding pressure maintenance: 0.15–0.3 MPa

Raw Material Characteristics of HDPE Butt Fusion Equal Y Tee for Water

• Density: 0.948–0.965 g/cm³ (ISO 1183)
• Melt flow index: 0.25 g/10min (190°C/5kg)
• Elastic modulus: 800–1100 MPa (ISO 527)
• Elongation at break: >600% (ISO 527)

Typical Applications of HDPE Butt Fusion Equal Y Tee for Water

• is used in municipal water distribution networks.
• serves industrial cooling water circuits.
• is installed in irrigation system mainlines.
• is used in desalination plant transfer lines.

Application Scenarios of HDPE Butt Fusion Equal Y Tee for Water

• 45° branch connections in water networks — is the standard Y tee for these branches.