HDPE Butt Fusion Eccentric Reducer for Water

Key Features of HDPE Butt Fusion Eccentric Reducer for Water

• Eccentric design prevents air pocket accumulation in horizontal lines.
• ISO 4427-2 compliant wall thickness specifications.
• Pre-machined fusion zone guarantees joint integrity.
• Standard 45° and 90° gradual transition angles.

Manufacturing Process of HDPE Butt Fusion Eccentric Reducer for Water

Each is produced by computer-controlled injection molding.

Critical Process Parameters of HDPE Butt Fusion Eccentric Reducer for Water

• Melt temperature control accuracy ±1.5°C
• Mold cooling rate gradient management
• Closed-loop injection pressure monitoring
• Crystallinity uniformity testing

Raw Material Characteristics of HDPE Butt Fusion Eccentric Reducer for Water

• Density: 0.950–0.965 g/cm³ (ISO 1183)
• Melt Flow Rate: 0.3–0.5 g/10min (190°C/5kg)
• ESCR ≥5000h (ISO 13479)
• Carbon black dispersion ≤Category 3 (ISO 18553)

Typical Applications of HDPE Butt Fusion Eccentric Reducer for Water

• is used in municipal water transmission pipe size transitions.
• serves industrial cooling water pressure regulation sections.
• is installed at agricultural irrigation pump inlets and outlets.
• is used in desalination plant pre-treatment pipelines.

Application Scenarios of HDPE Butt Fusion Eccentric Reducer for Water

• Pipe size transitions and air pocket prevention — is the standard eccentric reducer for these applications.