The HDPE Socket Fusion Gate Valve for Water is a full-bore gate valve with socket fusion connections, designed for reliable flow control and isolation in potable water and industrial water piping systems.
Key Features of HDPE Socket Fusion Gate Valve for Water
- Full bore design for low flow resistance.
- Resistance to chemical corrosion and UV degradation protects.
- Fused joints ensure permanent zero-leakage sealing.
- The fitting complies with potable water safety standards.
Manufacturing Process of HDPE Socket Fusion Gate Valve for Water
Each is produced by injection molding with computer-controlled thermal fusion.
Critical Process Parameters of HDPE Socket Fusion Gate Valve for Water
- Melt temperature control: 200–230°C
- Fusion pressure accuracy: ±0.2 bar
- Cooling gradient management
- Joint concentricity tolerance: ≤0.1mm
Raw Material Characteristics of HDPE Socket Fusion Gate Valve for Water
- Density: 0.955 g/cm³ (ISO 1183)
- Melt Flow Index: 0.45 g/10min (190°C/5kg)
- Tensile Strength: ≥25 MPa (ISO 527)
- Resistance to Slow Crack Growth: ≥500h (ISO 13479)
Typical Applications of HDPE Socket Fusion Gate Valve for Water
- is used for flow control in municipal water supply networks.
- serves isolation valves in industrial cooling water systems.
- is installed for mainline shut-off in irrigation systems.
- is used in pipeline regulation in wastewater treatment plants.
Application Scenarios of HDPE Socket Fusion Gate Valve for Water
- Pressure zone isolation and mainline control — is the standard valve for these applications.
